Atomwerk Engineering WAS about  quality! We believed that quality  comes WAY before quantity! We  stuck to our guns to the end.

Note: Installing spring plates is a very dangerous task and should never be attempted by an amateur or without using the proper installation tools. If you are not a competent mechanic - DO NOT ATTEMPT TO INSTALL!!!

Atomwerk Engineering Inc. All rights reserved |  Privacy Policy | Terms of Use | Links | Retailers

Full Description:

Stop wheel hop and put more power to the road! That’s right - installing these plates will make your car faster, if you have a high-horsepower engine. That’s because no horsepower will be wasted in vibrations and pointlessly spinning your wheels. Without wheel hop your car will have no choice but to “hook up” and put the power to the road. This is a set of fully adjustable Racing Drop Plates. These plates are the best that money can buy! Essentially they are the Deluxe Assembled Sets with a Hub Adjuster added to it. This means that you will have the full performance and strength of Racing Drop/Raise Plates and the rapid articulation that the needle bearings offer. However the true advantage comes from the ability to rapidly adjust these on the fly with just the turning of a screw and locking of a nut. With these plates your ride will be great! You will no longer be limited to one ride height alone. Headed to the show? Ride there in comfort and then drop your car down when you arrive and lock it! Headed to the track? The lock adds the strength to endure constant torture. You will now have the ability to fine tune your rear suspension as never before. And since our plates are engineered intelligently, it means that your vehicle will perform safely and with a new sense of precision! Make no mistake... an Atomwerk suspension is superior to the stock suspension at all heights. They are stronger, smoother, and adjustable. They are beautiful!

The Spline Stubs are 2.0" in diameter and are made from 4340 chromoly steel. Then they are machine finished and precision ground and then welded to spring plates. The spring plates are 1/4" thick, laser-cut, grade 50 tool steel, which makes them about as tough as it comes. This is about the strongest material one can find to withstand constant shock, flexing and absorbing without losing shape as a spring plates should. These Drop/Raise Plates come standard with a matte black, silver, or translucent red powder coat finish (other colors $40 extra), which is far more durable and beautiful than the industry-standard cheap zinc coatings that you will find on most suspension components. They also come with their own laser-cut brushed stainless steel badges that set them apart from anything else in the world! They come in the following increments:

Adjustable Racing Drop and Raise Plates for Swing Axles

You break t, we’ll replace it no questions asked!

Click here for the technical write up.

Note: By buying any products from us, you are agreeing to all terms and conditions.

Hub Tech Hub Tech

Swing Axle:

Stock Height

1.2” Drop

2.4” Drop

3.6” Drop

1.2” Raise

Keep in mind when making your selection that each spring plate has a variance of an inch in either direction. For example if you wanted to drop your VW 3.25” then you should purchase the 3.6” Drop Plates and then index them on your VW so that it sits 3.25”.